Insulator crimping connection machine

1.eighit cylinders 2. with reversible molds

Principle of work:

There are eight cylinders distributed in the press. Main die block is located on the every cylinder. Under the action of the hydraulic piston, after a few seconds, hardware fitting will be deformed, and strong pressure on the mandrel will be translated into a combination of hardware components and mandrel surface friction in order to achieve the necessary mechanical strength.The great strong pressure make sure the good sealing performance between the hardware fitting and mandrel.

Working principle of detection and control system

Non-destructive detection system adopts the principle of acoustic emission detection. The launch sensor is located on the press-fit tooling. When the mandrel is broken, signals received by the sensor will send into monitoring computer signal processing system after the signals is enlarged by pre-amplifier and main amplifier .A powerful signal processor in the system will process the signals, it adopts spectrum analyzer to recognize modes. This system displays signal waveforms real-timely ,outputs alarm signals to realize sound and light alarm and stop press-fit process.

Parameter:

Type		800T(A)/(B)
Measurement		1650 *1280 *1950mm(L*W*H)
Weight		3600kg
Max. force of crimp connection kN		8000KN
Hydraulic system pressure		0-31.5(Mpa)
The applicable diameter range of power fittings. mm	Max. crimp connection diameter.	∅240
	Max. flange diameter	∅340
Control mode		Micro-computer control
Operation mode of crimp connection machine		Automatic
Power supply		AV380v~50Hz
Power of electric motor KW		10KW

Insulator crimping connection machine